Podotactil Platform Edge
Click on the photo to see it in full size (referential images)
PRODUCT INFORMATION
This are pre-molded micro-concrete 10 mm thick tiles, for signaling on public roads. Its use is exclusively for floors, especially platform edges.
The tiles are made up of two textures: circles and squares. Each plate measures 0.30 x 0.90 m. The color of the plates is incorporated into the dough.
COLORS
Due to its cementitious composition, the colors are not uniform: they may show changes in tone within the same tile and/or in relation to the tiles of the same batch.
TEXTURE
MEASURES AND THICKNESSES
- 30 x 90 cm (1 cm thickness)
USES
To be used on floors: both indoors and outdoors.
To be used on floors: both indoors and outdoors.
ADVANTAGES
– low thickness
– low weight
– low absorption
– High resistance to abrasion
– high impact resistance
– does not discolor with UV rays
ZATOH tiles are mostly made up of:
– Cement
– Selected sand
– Additives
– Pigments
– Cement
– Selected sand
– Additives
– Pigments
Firm cement binders that do not flake and do not contain rising moisture.
NOTE: The application surface must not have slopes greater than 2 mm in 3 m.
NOTE: The application surface must not have slopes greater than 2 mm in 3 m.
– Sweep and clean with clean water and neutral detergent
– Apply sealant to water approximately every 6 months or depending on the intensity of traffic.
– Apply sealant to water approximately every 6 months or depending on the intensity of traffic.
7 Kg (each tile)
Each plate is delivered individually heat-sealed and palletized for later transfer to work.
