3D Range FLOW
CLICK on the photo to see it in full size (reference images)
PRODUCT INFORMATION
The tiles ZATOH FLOW 3D Range are precast tiles of micro-concrete for use exclusively in walls. The color of the plates is incorporated into the dough.
Recommended for restaurants, hotels, bars and any space where you want to place an original and novel product.
COLORS
Due to its cementitious composition, the colors are not uniform: they may show changes in tone within the same tile and / or in relation to the tiles of the same batch.
TEXTURE
COLORS
USES
Suitable for floors and walls, both indoors and outdoors.
Suitable for floors and walls, both indoors and outdoors.
ADVANTAGES
– low thickness
– under weight
– low absorption
– High resistance to abrasion
– high impact resistance
– does not discolor with UV rays
The ZATOH tiles are mostly made up of:
– concrete
– selected sand
– additives
– pigments
– concrete
– selected sand
– additives
– pigments
Firm concrete binders that do not flake and do not contain rising moisture.
The application base must not have slopes greater than 2 mm in 3 m.
The application base must not have slopes greater than 2 mm in 3 m.
– Sweep and clean with clean water and neutral detergent
– Apply sealant to water approximately every 6 months or depending on the intensity of traffic.
– Apply sealant to water approximately every 6 months or depending on the intensity of traffic.
– 30 x 60 cm: 18 kg
Each tile is delivered individually heat-sealed and palletized for later transfer to or from.ra.
